ST002
Order Code:
ST002 is a TCT saw blade for flying cut off applications. It provides an opportunity to greatly increase the tube manufacturing line speeds and cut the production costs. There are 3 versions available as for single / twin cut off units, applications with heavy inside scarf and for orbital flying cut off applications.
Main application areas and the parameters:
• Single and twin flying cut-off machines designed for TCT cutting with small or no ID-scarf. Tubes with a tensil strength up to 1.000 N/mm2
Cutting speed: 350 m/min (starting value). Tooth load: 1/2/3: relation 1/2/0.8. 0.05/0.10/0.04 mm/tooth.
• For flying cut-off applications dealing with heavy inside scarf. It features a very specific tooth geometry, combined with highly shock resistant carbide tips. Due to strong saw body shoulders
which give the teeth maximum support, the combination tooth/body obtains very high stability and fracture resistance.
Cutting speed: 400 – 500 m/min (choose max available).
Tooth load,: 1/2/3: relation 1/1/1. Starting value 0.04 mm/tooth.
Machines: MTM, OTO mills, Nakata and Olimpia.
• For orbital flying cut-off applications on tube mills. Key features of this saw blade are fracture-resistant carbide tips, protected with PVD coating. Cutting speed: 350 – 400 m/min.
Feed rate: 1/2: 0,04 / 0,12 mm/tooth.
Machines: MTM, OTO mills, Elmaksan, Kusakabe, Linsinger, Nakata and SMS Meer.
ST002 is a TCT saw blade for flying cut off applications. It provides an opportunity to greatly increase the tube manufacturing line speeds and cut the production costs. There are 3 versions available as for single / twin cut off units, applications with heavy inside scarf and for orbital flying cut off applications.
Main application areas and the parameters:
• Single and twin flying cut-off machines designed for TCT cutting with small or no ID-scarf. Tubes with a tensil strength up to 1.000 N/mm2
Cutting speed: 350 m/min (starting value). Tooth load: 1/2/3: relation 1/2/0.8. 0.05/0.10/0.04 mm/tooth.
• For flying cut-off applications dealing with heavy inside scarf. It features a very specific tooth geometry, combined with highly shock resistant carbide tips. Due to strong saw body shoulders which give the teeth maximum support, the combination tooth/body obtains very high stability and fracture resistance.
Cutting speed: 400 – 500 m/min (choose max available).
Tooth load,: 1/2/3: relation 1/1/1. Starting value 0.04 mm/tooth.
Machines: MTM, OTO mills, Nakata and Olimpia.
• For orbital flying cut-off applications on tube mills. Key features of this saw blade are fracture-resistant carbide tips, protected with PVD coating. Cutting speed: 350 – 400 m/min.
Feed rate: 1/2: 0,04 / 0,12 mm/tooth.
Machines: MTM, OTO mills, Elmaksan, Kusakabe, Linsinger, Nakata and SMS Meer.
Advantages:
• Extremely high line speed because of very short cutting times
• Very good surface finish, burr-free cut
• Increased uptime
• High blade life
• Cuts heavy ID scarf
• Cuts high tensile API Pipes (up to 1.800 N/mm2)
• Various tooth geometries available
• Burr-free cut